Air Conditioning Repair in Bossier City, Louisiana

Man explaining AC options to a couple

How to Fix 3 Frequent Troubles

Troubleshooting and doing your own AC repair in Bossier City, Louisiana, can seem like a lot of work.

But it doesn’t have to be. There are a few easy adjustments you can attempt on your own that could help you get out of an AC service call.

When you’re experiencing air conditioning problems, follow this diagnostic list before calling a heating and cooling repair professional like Central Aire Heating & A/C Inc.

Our pros are here at 318-855-2326 when you need expert service. We provide AC repair and work on most models of central air conditioners.

CALL TODAY 318-855-2326

If you want to get a modern air conditioner, we also can do AC installation.

When you’re talking with us, think about a yearly AC maintenance plan that may help you bypass potential problems. We can advise how often you need air conditioner service.

Prepared to start finding the problem with your system? Use our easy guide below. Most of these processes don’t involve any HVAC experience.


1. AC Won’t Turn On

There can be several reasons why your air conditioner won’t run: an overloaded circuit breaker, wrong thermostat settings, a turned off switch or a full condensate drain pan.

breaker icon
Triggered Circuit Breaker

Your cooling won’t work when you have a blown breaker.

To determine if one has blown, go to your residence’s main electrical panel. You can spot this metallic fixture on the wall in the basement, garage or closet.

  • Confirm your hands and feet aren’t wet before you work on the panel or breakers.
  • Find the breaker labeled “AC” and confirm it’s in the “on” position. If it’s tripped, the breaker will be in the middle of the panel or “off” spot.
  • Steadily transfer the breaker back to the “on” spot. If it instantly trips again, don’t touch it and reach us at 318-855-2326. A switch that keeps flipping could indicate your residence has an electrical problem.

incorrect thermostat icon Wrong Thermostat Settings

If your thermostat isn’t signaling your equipment to run, it won’t turn on.

The main part is checking it’s set to “cool” and not “heat.” Otherwise your AC may not turn on. Or you might have hot air blowing from vents because the furnace is on instead.

If you rely on a regular thermostat:

  • Put in new batteries if the monitor is empty. If the monitor is presenting jumbled letters, buy a new thermostat.
  • Make sure the right mode is showing. If you can’t alter it, reverse it by decreasing the temperature and hitting the “hold” button. This will force your AC to work if programming is not right.
  • Attempt to set the thermostat 5 degrees below the house’s temperature. Your AC won’t work if the thermostat is set the same as the room’s temperature.

Once your thermostat is adjusted properly, you should start getting cool air quickly.

If you rely on a smart thermostat, like one made by Nest, Ecobee, Lux, Honeywell or Bosch, look at the manufacturer’s website for help. If you’re still having problems, reach us at 318-855-2326 for help.

switch icon Shut-Off Switch

Your cooling equipment probably has a power-cutting switch near its outdoor unit. This switch is commonly in a metal box hung on your residence. If your AC has recently been maintained, the device may have unintentionally been put in the “off” location.

Overflowing Condensate Drain Pan drain pan icon

Condensate drain pans catch the extra condensation your air conditioner takes out of the air. This pan is located either under or within your furnace or air handler.

When there’s an obstruction or backed up drain, water can build up and initiate a safety feature to switch off your air conditioner.

If your pan involves a PVC pipe or drain, you can get rid of the extra water with a custom pan-cleaning tablet. You can get these tablets at a home improvement or hardware retailer.

If your pan involves a pump, look for the float switch. If the switch is “up” and there’s liquid in the pan, you might have to install a new pump. Call us at 318-855-2326 for assistance.

2. AC Blows Warm Air

If your air conditioner is working but not providing cold air, its airflow may be blocked. Or it may not have enough refrigerant.

airflow icon

Clogged Airflow

Your unit’s airflow can be decreased by a clogged air filter or dirty condenser.

How to Put in a New Your Air Filter

A dusty filter can create many troubles, including:

  • Reduced airflow
  • Frosted refrigerant lines or evaporator coil
  • Inconsistent cooling
  • Bigger cooling bills
  • Making your system stop working sooner

We suggest installing new flat filters once a month, and creased filters every three months.

If you aren’t sure when you last replaced yours, switch off your equipment totally and take out the filter. You can spot the filter in your furnace or air pump’s blower compartment. It might also be located in an adjoining filter case or wall-mounted return air grille.

Hold the filter up to the sunshine. If you can’t see any light, you should replace it.

clean AC icon

How to Clean Your Air Conditioning Equipment

Weeds, grass and bushes can obstruct your condensing system. This can restrict its airflow, lower its energy efficiency and affect your comfort. Here’s a method you can follow to get your unit working smoothly again.

  1. Turn off the electrical current totally at the breaker or external device.
  2. Get rid of greenery rubbish around the AC. Once you’ve cleared all the debris within a two-foot radius, you can use a soft brush or vacuum to gingerly clean the equipment’s fins. Kinked fins can also affect performance, so you can attempt to correct them with a blunt knife.
  3. Remove the upper part of your unit and pull out any leaves or sticks that has accumulated. Then wipe down the condenser fan with a damp scrap cloth.
  4. Use a hose nozzle to gingerly clean the fins from inside the unit. Don’t get moisture on the fan motor.
  5. Put the top back on and restore the power.
refrigerant icon

Not Enough Refrigerant

When cooling units don’t have sufficient refrigerant, they’ll have to work much harder to remove heat and humidity from your space.

Here are a few symptoms that your equipment is leaking refrigerant:

  1. It takes an extended amount of time to lower the temperature in your residence and you’re regularly decreasing the temperature on the thermostat.
  2. Air conditioning blowing through the ducts isn’t as chilled as it should be.
  3. You’re noticing hissing or burbling racket when the air conditioning is on.
  4. Your evaporator coil is frosted on account of having trouble absorbing humidity.

Think your system is losing refrigerant? You need a authorized heating and cooling service specialist to fix the leak and replenish the correct amount of refrigerant in your unit. Reach us at 318-855-2326 for support.

AC not blowing icon

3. AC Not Blowing Enough Air

When it feels like you’re not having ample amounts of cold air, there’s possibly an obstruction or separation within your cooling equipment.

  • The beginning place is checking your air filter. Get a new one if it’s filthy.
  • Then check the ductwork is clear throughout your house.
  • If you’re still not receiving adequate chilly air, you should have your ducts examined by a specialist like Central Aire Heating & A/C Inc. Your ducts could need to be serviced or relinked in tricky areas like your attic, basement or crawl space.

Request Pro Air Conditioner Repair Now

When you have to have air conditioning service quickly, get in touch with the HVAC repair pros at Central Aire Heating & A/C Inc at 318-855-2326. We’ll speedily determine the issue when your equipment won’t work or give sufficient chilly air.

CALL TODAY 318-855-2326

Request Service